Supply carton equipment

Technical parameters of carton equipment:

Mechanical door width: 2800mm

Plate roller circumference: 1470mm (including plate)

Size of large board: 2650mm×1400mm

Small board size: 750mm×380mm

Large printing area: 2800mm×1400mm

Small slot spacing: 1), 290mm×60mm×290mm×60mm(anti-cutter assembly, this data is carton: length × width)

Normal working speed: 40~60pcs/min

Installed capacity: 8.2KW

Diameter of anilox roller: 216mm

Rubber roller diameter 210mm

Wire: the two groups of printing roller are 220 lines

Plate thickness: 3.94-7.2mm

Blade thickness: 7mm

Function of carton equipment:

Carton equipment is designed and manufactured in accordance with high requirements, high precision and high quality.

Choose excellent materials and accessories.

High frequency quenching of transmission gear teeth HRC42-46.

Automatic reset, automatic reset, automatic brake.

Maintain long-term printing color sets.

Adopt PLC, touch screen multi-function control, high degree of automation.

All electrical, electronic and pneumatic parts adopt European standard.

Structure features of carton equipment:

Adopt spherical sealing friction pair, oil-free bearing support positioning, both ends of the seal wear (one-way only one end) with the help of spring prepressure at any time compensation, compensation along the bearing slowly back to the shell.Spherical sealing friction pair has a large degree of freedom within the clearance allowable range, so the accuracy of the installation is not high.The hollow shaft moves synchronously with the supporting equipment, and the shell is relatively static.Hollow shaft, ball and ball spring seat sealing ring relative to form a spherical friction pair, sealing ring wear to a certain thickness, replace a new can continue to work.The fluid enters the hollow shaft through the opening of the shell and leads to the equipment, and then leads out from the inner tube (there is no one-way). It can also work in reverse, and the fluid medium can be isolated from each other in the inner cavity of the rotary joint.

Use parameters:

High pressure: 1.6MPa

High temperature: 220℃ (hot oil 280℃)

High speed: 100 RPM

Applicable medium: water, steam, hot oil, etc.